Nike

Set up Nike FCFS / Flow monitoring, US account checkout and Canada cart links in Stellar 4.0.

Choose Nike in Stellar 4.0. This guide covers FCFS (first come, first served), also called Flow releases, rather than Draw or raffle entries. Monitor checks availability and FCFS attempts checkout. Preparation helps, but a stock alert is not a guaranteed purchase.

Video Guide

No dedicated video is included in this guide. Follow the written Stellar 4.0 setup and screenshots below.

Quick Start: Recommended Setup

1. Choose the correct region. US checkout uses an account; the Canada flow sends a cart link for manual checkout.
2. Prepare the profile, account where needed, verification method and tested proxies.
3. Get the Product SKU and select the intended size or Random.
4. Create a monitor and an fcfs task for the same product; use Watch Task as described below.
5. Start at the release’s recommended time and check verification or manual-checkout prompts.

Preliminary Checklist

• Save a checkout profile with accurate shipping, billing, contact and payment details.
• Prepare proxy groups. Datacenter, ISP or residential proxies can be used for monitoring; ISP proxies are the starting recommendation for FCFS tasks. Use working proxies and adjust if your setup is blocked.
• For US checkout, prepare your Nike account and access to the email that receives its verification codes.
• Find the product SKU and confirm that the release uses FCFS/Flow. Use one SKU per task.
• Choose sizes you actually want and check current release instructions and purchase limits.

A SKU is Nike’s identifier for the specific product. Find it in the product-page details or obtain it from your cook group. Enter only one SKU in Product SKU; do not paste a list of products into one task.

The Size dropdown includes Random and specific sizes in several formats. Select the size format that matches the product and release. Use Random only if you are willing to receive a size chosen by the task. A size appearing in the menu does not mean the product has that size in stock.

Accounts & Sessions

Account and verification setup

For a US task, save the intended account under Accounts → Nike, then select it in the task’s Account field. Older guides may call it a Session. Leaving the account empty is for the Canada guest workflow, not US automated checkout.

OTP Input offers IMAP, Manual and AYCD. IMAP lets Stellar retrieve email verification codes from a connected mailbox; set up the account’s mailbox in the IMAP tab first. Manual requires you to respond to the code prompt. AYCD requires its integration to be configured. Choose the method you have actually prepared before starting tasks.

OTP Input selects how Stellar receives verification codes. Prepare the configured email-verification method before running the US or Canada flow described below.

Supported Modes

• United States: a Nike account is required for automated checkout. Save it in Accounts → Nike and select it in the FCFS task.
• Canada: the module supports guest setup and generates a cart link for you to open and complete checkout manually. Receiving a cart link is not the same as a completed order.
• monitor: Checks stock for the specified product.
• fcfs: Runs the first-come, first-served purchase flow. US and Canadian completion steps differ.

Monitor Mode Breakdown

1. Open a Nike task group and choose Create Task → monitor.
2. Select the required Profile and Monitor Proxy group.
3. Enter the Product SKU and choose Size.
4. Review Delay and Reset Delay, then create the task. Start with one Monitor setup for the SKU and sizes you intend to run.

A 3000 ms delay means three seconds and is a starting recommendation, as well as the current default. Reset Delay is the pause before monitoring resumes after detecting stock. Follow current release guidance and increase delays if your setup is being rate-limited.

Name

Optional label to help you recognize this task. Use the product, account or purpose rather than leaving many tasks indistinguishable.

Mode

Select the mode named in this breakdown. Changing the mode changes the available fields and what the task does.

Start Time and End Time

Optional scheduling controls. Leave blank for manual timing. A scheduled task must still be started in Stellar; entering a start time does not start a stopped task.

Task Qty

The Qty at the bottom creates that many copies of the task. Use 1 while learning and check account limits before creating duplicates.

Profile

Choose the saved profile intended for this purchase. Check the email, contact, shipping, billing and payment details before starting.

Product SKU

One Nike product identifier, obtained from the product details or cook group.

Size

Choose a product-compatible size, or Random only if any selected size is acceptable.

Delay

3000 ms is the current default and starting recommendation.

Monitor Proxy

Choose the tested proxy group used to check stock. Keep its requests and data use within the capacity of the proxy pool.

Reset Delay

Pause before the Monitor resumes after a stock trigger. Use the retailer recommendation above, or leave optional values blank unless needed.

FCFS Mode Breakdown

1. Choose Create Task → fcfs.
2. Select your Profile and the required Checkout Proxy group.
3. Enter the same Product SKU and compatible sizes as the Monitor task. Start Product Quantity at 1.
4. Select your saved Nike Account for US checkout. Leave Account blank only when using the Canada guest/cart-link flow.
5. Choose the OTP Input method you prepared.
6. Enable Watch Task to use the matching Monitor’s stock signal. Review Delay and any optional scheduling, then create the task.
7. Start both tasks when you are ready. For Canada, watch for the cart link and complete the purchase manually; for US, the task can place the order automatically.

Example: a Monitor checks one Nike SKU and your chosen size. An FCFS task uses that same SKU, a compatible size, your profile and US account, with Watch Task enabled. When the matching availability signal arrives, the FCFS task can attempt checkout.

Name

Optional label to help you recognize this task. Use the product, account or purpose rather than leaving many tasks indistinguishable.

Mode

Select the mode named in this breakdown. Changing the mode changes the available fields and what the task does.

Start Time and End Time

Optional scheduling controls. Leave blank for manual timing. A scheduled task must still be started in Stellar; entering a start time does not start a stopped task.

Task Qty

The Qty at the bottom creates that many copies of the task. Use 1 while learning and check account limits before creating duplicates.

Profile

Choose the saved profile intended for this purchase. Check the email, contact, shipping, billing and payment details before starting.

Product SKU

One Nike product identifier, obtained from the product details or cook group.

Size

Choose a product-compatible size, or Random only if any selected size is acceptable.

Delay

3000 ms is the current default and starting recommendation.

Checkout Proxy

Choose the tested proxy group used for login and checkout. Follow the retailer-specific proxy advice above.

Watch Task

Enable to wait for a matching running Monitor rather than have the checkout task monitor on its own. Product and fulfillment settings must match. A waiting status is normal until stock is detected.

Account

Required for US automated checkout. Canada uses the guest/cart-link flow and requires manual checkout.

OTP Input

IMAP, Manual or AYCD, configured before running.

Product Quantity

Units requested in one order. Begin with 1 and respect the product’s purchase limit. This is separate from the task-copy Qty at the bottom.

FCFS Mode — Other Fields

• Watch Task: with this enabled, FCFS waits for a matching Monitor signal. With it disabled, the task checks the SKU itself before attempting checkout and uses proxy traffic for those checks.
• Product Quantity: units to request per order. Start at 1 and respect the product’s purchase limit.
• Qty at the bottom: how many tasks to create. Keep this at 1 for a first setup.
• Start Time / End Time: optional scheduling. Leave blank if you will start and stop manually.
• The current FCFS form does not show the old Discount field. Do not look for an unavailable coupon setting in these task controls.

FAQ & Release Preparation

Common Errors and Fixes

• Account or login error on US: check the selected saved account and its credentials. US checkout cannot use the Canada guest setup.
• Verification code missing: check the account email, mailbox connection and OTP Input method.
• Waiting for stock: confirm the Monitor is running, SKU and sizes are compatible, and Watch Task is enabled.
• No purchase after a Canada cart link: open the link and complete checkout yourself before stock sells out.
• Proxy errors: check the proxy group and use a working alternative; increasing aggressive delays may help.
• A live US checkout test may purchase the item. Test only an item you intend to buy.

---