ToysRUsCa

Complete guide on our toys R Us CA module

ToysRUsCa supports Canadian Toys R Us shipping checkout, store pickup and monitoring in Stellar 4.0. Shipping and Pickup use guest checkout with your selected profile.

Quick Start: Recommended Setup

1. Prepare your Canadian profile, working proxies and the product SKU.
2. Configure a captcha provider before running. For Bot, install Google Chrome and prepare Stellar Captcha Harvesters.
3. Create a ToysRUsCa group and choose Create Task → shipping or pickup.
4. Select Profile and Checkout Proxy, enter SKU and leave Product Quantity at 1. For Pickup, enter Postal Code and choose a suitable Radius.
5. Select the prepared Captcha Provider. Start with Delay 3000–5000 ms and Endless Mode off.
6. For a timed release, leave Watch Task off. For random restocks, create Monitor with the matching SKU and shipping/pickup method, then enable Watch Task on checkout.
7. Review details before creating and starting tasks. Checkout tasks can place real orders.

Preliminary Checklist

Before setting up tasks on Toys R Us CA, make sure you have everything below prepared:

• Profiles

Create and save your checkout profiles under the Profiles tab in Stellar. These contain your billing, shipping and payment info.

• Proxies

• ISP proxies – Recommended for some of your tasks
• Residential proxies – Recommended for majority of your tasks
  • Save both proxy groups under the Proxies tab in Stellar.
    • If you're looking for proxies, check out Stella Proxies for high quality ISP and Residential proxies. As always, it's recommended to have multiple proxy providers, don't just rely on one.

• Cook Group Access

Optional but recommended. Your cook group can help you find product URLs, SKUs and early restock alerts.

For your first setup, start with a small, tested residential proxy pool, matching the checklist above. Watch your data allowance during long runs. Working ISP/datacenter proxies are alternatives if they perform well for ToysRUsCa. Test your provider and adjust delays before increasing task counts.

Captcha Harvesters and Providers

Shipping and Pickup require a Captcha Provider: Bot, Aycd, Capsolver or Capmonster. A captcha is a website verification challenge; the selected provider handles it when requested.

• Bot: use Stellar Captcha Harvesters with Google Chrome installed. Open the harvesters before running and be ready to solve challenges.
• Aycd: configure your AYCD AutoSolve connection before selecting it.
• Capsolver / Capmonster: configure the matching service key and available balance. A valid key alone does not guarantee that a challenge is solved.

If a task waits for captcha, check the selected provider and its connection. For Bot, confirm Chrome and the harvesters are ready; for an external service, check its balance and errors.

Supported Modes

• shipping: guest checkout for delivery.
• pickup: guest checkout for collection within the selected postal-code area and radius.
• monitor: checks shipping or pickup stock and signals matching checkout tasks; it does not buy the item.

Shipping Mode

The screenshot below shows ToysRUsCa Shipping mode in Stellar 4.0.

Shipping Field Breakdown

• Name: optional task label. Mode: choose shipping.
• Profile: required shipping, billing and payment details.
• Checkout Proxy: saved proxy group used for checkout.
• SKU: product identifier, not the full product URL. See the example below.
• Delay: retry interval in milliseconds; the current default is 3000. The existing recommendation is 3000–5000, adjusted for errors and proxy quality. This is not a guarantee of safe continuous running.
• Product Quantity: units in one order. Start at 1 and follow product, person and household limits.
• Captcha Provider: Bot, Aycd, Capsolver or Capmonster; configure the selected option first.
• Endless Mode: repeats after successful checkout. Leave off unless repeated orders are intentional. Enabling it reveals Endless Limit; set a deliberate maximum.
• Watch Task: enabled waits for a matching Monitor stock signal; disabled operates independently.
• Start Time / End Time: optional operating window. You still need to start the task in Stellar.
• Qty at the bottom: number of task rows to create, not units in an order.

Finding the SKU

A SKU is the identifier for a specific product. In the existing example, it is the last part of the URL before .html:

https://www.toysrus.ca/en/Pokemon---Lights-and-Sounds---Pikachu/74B2F99F.html

SKU: 74B2F99F. Use the actual product’s identifier; the example only shows the format. Your cook group can help confirm release SKUs.

Pickup Mode

The screenshot below shows ToysRUsCa Pickup mode in Stellar 4.0.

Pickup has the same Profile, Checkout Proxy, SKU, Delay, Product Quantity, Captcha Provider, Endless Mode/Limit, Watch Task, scheduling and task Qty controls described above. Set Mode to pickup and also configure:

• Postal Code: required starting area for finding pickup stock.
• Radius: choose 5, 10, 15, 25, 50, 75 or 100. Choose an area you are willing to travel within; do not select a broad area unless you can collect from the resulting store.

Monitor Mode

The screenshot below shows ToysRUsCa Monitor mode in Stellar 4.0.

Monitor Field Breakdown

• Name: optional label. Mode: monitor.
• Monitor Proxy: proxy group for stock checks. No profile is required in this form.
• Monitoring Method: shipping or pickup. Match the checkout task’s method.
• SKU: same product identifier as the checkout task.
• Monitoring Delay: interval between checks in milliseconds; current default 3000. Adjust within a sustainable range for your proxies.
• Reset Delay: interval before checking again after detecting stock. Follow current release guidance where available.
• Postal Code / Radius: appear when Monitoring Method is pickup. Use the same intended pickup area as the checkout task.
• Start Time / End Time: optional operating window for a task you have started.
• Qty at the bottom: number of monitor rows to create.

Monitor + Checkout Example

1. Create Monitor for the product SKU and choose shipping or pickup. For pickup, enter the relevant Postal Code and Radius.
2. Create the corresponding Shipping or Pickup checkout task for the same SKU. Enable Watch Task and prepare its captcha provider.
3. Start both tasks. Monitor checks stock; checkout waits for the signal, then attempts the order.

FAQ

Do I still select Guest mode?

The current modes are shipping, pickup and monitor. Shipping and Pickup use your profile for guest checkout; there is no Account field.

What quantity should I use?

Start with Product Quantity 1. Popular items may have one-per-cart, person or household limits. Task Qty creates additional purchase attempts and does not change those limits.

Can I run continuously?

The older guide suggested delays of 3000–5000 ms for longer monitoring. Watch proxy errors, data usage and retailer limits; no delay guarantees uninterrupted operation.

Common Errors and Fixes

Checkout stays waiting

Check whether Watch Task is enabled. If so, confirm Monitor is running for the matching SKU, method and pickup area.

No pickup stock found

Confirm the SKU, Postal Code and Radius. Online shipping availability does not prove that a nearby store has pickup stock.

Waiting for captcha

Check the selected provider, Chrome/harvesters for Bot, or the external service connection and balance. Do not repeatedly restart all tasks without identifying the provider issue.

Proxy errors or repeated retries

Test the proxy group, try a working alternative and increase delays if requests are blocked. Check residential data balance during longer runs.

Quantity or checkout rejected

Reduce Product Quantity to the retailer’s allowed amount and verify the profile, stock and purchase limits. Check order confirmations before retrying.

If the troubleshooting steps above do not resolve the error, follow Get Help & Contact Support

---